We have shipped artworks all over the world. Each artwork is carefully boxed into one or several boxes depending on the size of the installation, with a custom hanging/installation profile included. If you are located outside of Australia, please contact us on +61400207268 to discuss which piece you are interested in and where you would like it shipped to. We will then work out cost of shipping and package it as securely as possible to reach you safely.

Once you have received your beach house art installation, take note on the front of one of the boxes will be an installation profile with hanging instructions. Please place the profile on the wall where you will be installing the sculpture, it may come in several pieces that fit together like a jigsaw puzzle, please ensure they line up perfectly and temporarily fix in place with blue-tac to the wall. Tape will remove paint.There will be a 'Midpoint', you may notice this is not always on the middle section of the profile, but it will be the midpoint of the actual sculpture, there will also be measurements either side to indicate how far either side of the midpoint the sculpture will go (both horizontally and vertically).Ensure you have it situated where you want it and that it will fit and suit the location.Check there are no hazards in the wall to prevent drilling (eg power/water). Once positioned correctly, drill pilot holes with a small drill bit into the wall where indicated on the profile.Screws and plugs have been included in the box. Install plugs and screws.Take note of which sculpture-piece goes on which screws based on numbering (numbers will match back of sculpture pieces).Remove profile and follow hanging order on profile along with any additional instructions.